Electric Chain Hoist - 120V Electric Hoist - 1Ton Single Phase Overhead Crane with G80 Chain - 10FT Lifting Height with Electrical Hook - Wired Remote Control for Garage, Shop, Hotel, Home

DescriptionHeavy objects, especially irregular objects, are hard to lift while costing lots of manpower. So an efficient lifting machine is necessary. A pure copper motor with high power (1600W) and sturdy chains made of G80 ensure high work efficiency with a strong load capacity (2204 lbs). It will be a great assistant for your lifting work!ApplicationIt is suitable for agriculture, factories, docks, mines, warehouses, logistics, construction sites, goods lifting, automobile manufacturing plants, railroads, stage construction, buildings, garages, ceilings, attics, barns, lofts, etc. It is used for lifting regular or irregularly shaped objects and can be used for various lifting equipment such as single columns, pilasters, and cranes.SpecificationColor: OrangeStyle: ModernHousing Material: Aluminum AlloyChain Material: G80Hook Material: Manganese SteelFinish Type: Baking PaintType: Single PhraseMotor Type: Pure Copper Conical Brake MotorPlug Type: US StandardRated Voltage: 110VRated Power: 1.6KWMotor Protection Grade: IP54Insulation Class: FChain Diameter: 6.3mm/0.25inchNoise: About 78dB(Non-specialized Instrument Testing)Maximum Load Capacity: 1T/2204 lbsLifting Speed: 4.3m/ 14.1ft/minLifting Height: 3m/ 10ftHandle Switch Wire Length: 3m/ 10ftProduct Size (L*H): 50.8*66cm/20*26inchPackage Size: 43*33*38cm/ 16.93*13*14.96inGross Weight: 60kg/ 132.3 lbsPackage Included1* Electric Chain Hoist1* Lifting Strap1* English InstructionNotes1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.2. The electric hoist has been oiled before leaving the factory, so it does not need to be refueled for the first time. The chain needs lubricating oil (not included), which can be brushed on the chain during use. Electric hoists are generally refueled after five months of use (depending on the specific situation).3. Please be operated by a dedicated person, and the operator should fully grasp the safety operation rules. It is strictly prohibited to pull or hoist at an angle. During use, it is prohibited to use it in an environment that is not allowed and exceeds the rated load and rated closing times per hour (120 times). It is not allowed to press two buttons on the control handle simultaneously to move the electric hoist in the opposite direction. Special attention should be paid to the condition of vulnerable parts during use.4. After completing the work, the main switch of the power supply must be opened and the power supply must be cut off. During use, specialized personnel must regularly inspect the electric hoist, take timely measures when faults are found, and carefully record them. When the gourd is not working, it is not allowed to hang heavy objects in the air to prevent deformation of the parts. If a malfunction is found during use, the power should be immediately cut off.5. The electric hoist comes with a limit, which automatically cuts off power when the goods reach the top, but it does not have a complete control effect. If the hoist is pushed to the top for a long time, it will cause the limit to malfunction and the hoist is also prone to damage. So during operation, attention should be paid to the upper part to avoid prolonged or multiple collisions with the limit.6. The tail of the chain cannot be installed anywhere, just naturally fall into the chain belt.7. The first installation of the operational specifications may cause the body to tilt when unloaded, which is a normal phenomenon and can be used with confidence.8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement.

• 【High Lifting Efficiency】: With a powerful pure copper motor (1600W), it can lift heavy objects to a height of 14.1ft in a minute to promote efficient work while saving labor costs.
• 【Stable Performance】: The stable rotor axle and strong pure copper motor with good heat dissipation and stability provide powerful power for lifting and ensure excellent performance with low noise&maintenance.
• 【Thoughtful Design】: The limit switch prevents damage to the machine by over-lifting the chain. Meanwhile, the hook with a safety latch can rotate 360° to lift objects in all directions and hold the machine stably high or attached to most trolleys or beam clamps, while promoting safety.
• 【Strong Load Capacity】: The hook and the double chain of 0.25-inch in diameter are strong and wear-resistant, ensuring a strong load capacity of 2204 lbs, which enables this product to lift heavy loads.
• 【Strong and Durable】: The aluminum alloy housing, G80 chain with heat treatment, and manganese steel hook have high strength and good rigidity to resist abrasion, impact, and deformation.